Diy convert slides to digital photos software#
Be prepared to write the driving software yourself.
You may be able to find some old film recorder in a dusty corner of the internet somewhere. This device was primarily used to record spy satellite image data onto film so that people could see and interact with it. The raster scan was done by a combination of the drum rotation and it also moving slightly sideways after each turn. It exposed 8x10 inch sheet film by attaching it to a rotating drum, then hitting it with a modulated laser spot. I remember one high end film recorder that was the size of a desk. The image was sent in three passes, one for each color component. Again it was common to use a black and white CRT with a filter wheel. Time to convert your snapshots, slides, and negatives to digital format Get the job done quickly with the right photo scanner. The host computer would write digital values, usually a scan line at a time. More modern film recorders (late 1980s) were digital. A common scheme was to have a camera pointed at a black and white monitor, with separate red, green, and blue filters that were switched in, usually by using a rotating filter wheel. Usually it took several seconds to 10s of seconds to expose each frame.
You connected video signals to them, and the result would end up on film. What you ask for used to be common, and called a film recorder. This is the only method that I can think of that you can do at home that will yield sufficient on-film resolution for display.ĭon't worry about trying to attempt colour film development at home, it is complex and expensive -just send your roll off for standard development. Inkjet printing is not an option due to the real-world resolution that could be achieved being very low ( 1/2sec) to negate any oddities caused by backlight/refresh frequency.